Junction box JB-K Eexe with terminals and cable glands
Technical data
| Material: | 30 % glass fabric/70 % polyester |
| Resistance to heat: | -40°C +90°C |
| Protection class: | IP 66 |
| Voltage: | max 660 V |
| Ex-approved: | EExe II T6 |
| connection: | Standard 2 pcs PG16 |
| Part.no | 89 992 60 |
NOTE! The plastic material in the box is conductive.
Range of application
Cable entry device for up to 120mm thick insulation. Specially designed to allow convenient connection of one, two or three heating cables of the self-limiting type, or three constant wattage cables. The mounting bracket is fixed directly to the pipe using a stainless steel strap. The heating cable is laid inside the bracket and so is very well protected against mechanical damage. Between the bracket and the junction box there is a special grommet, designed to take up to three heating cables. The junction box comes equipped with the required number of terminal blocks and has a gland for the incoming power supply cable.
When using series resistive heating cable only one loop per mounting bracket is possible.