Accessories Frost Protection

Glass woven tape

Glass woven tape 50mm x 12mm

glasvavstape

Area of use

Mounting and fixing of heating cables and heating foils.

Characteristics

Provides good lasting fixation of for example heat tracing wrapped around pipe, will not shrink, stretch or burn and has a high tensile strength.

Base: Glass woven tape
Adhesive substance:  Acrylic
Thickness: 0,17 mm
Colour: White
Adhesion to steel: 0.44kg/cm
Tensile strength:  26kg/cm
Max. stretching 5%
Protective backing None
Temperature range  -30°C / 140°C
Part.no: E89 992 51
Should be stored in a dry, dark space with an in-door air humidity of 50% and a temperature of +15°C to 20°C.

 

Connection/End termination BTL

Connection-/End termination kit BTL

Part No: 8986139

A Thread PG 11 1 pc
B Shrinking tube yellow/green 80mm
C Shrinking tube 3 mm 80mm 2 st
D Shrinking tube 9,4 mm 25mm
E Shrinking tube 9,4mm 90mm
F Shrinking tube 6mm  30mm
G Caution sign PIPE 1 st
anavbtl8986139

Supplementary kit (internal) BTL incl. R20-thread

Part.no: 8986138

komplettsats8986138

 

Aluminium tape

Aluminium tape 90°C 50x50mm

aluminiumtapeArea of use

Mounting and fixing of heating cables and heating foils.

Characteristics

Provides good dissipation of heat and a substantial increase in power output if applied to self-limiting heating cable covering it completely. Protects a conventional heating cable against local overheating caused by penetration into insulation material.

Part.no: E89 992 44
Base: Woven glass-cloth reinforced aluminium foil
Adhesive substance:  Acrylic
Thickness:  0,105mm
Colour: Blank Aluminium
Adhesion to steel: 1850gr/25mm
Tensile strength: 10.8Kp/25mm
Diffusion density: below 1g/m²/24 tim
Max stretching: 5%
Protective backing: Silicone treated paper
Temperature range:  -5°C / 90°C
Should be stored in a dry, dark space with an indoor air humidity of 50% and a temperature of +15°C to 20°C.

 

R20 Thread

R20-thread – BTL

genomforingr208989195Part.no: 8989195

Thread for internal installations.

 

Caution Sign/tape

Caution Sign Ground
varningsskylt

Part.no: 8999246

Area of use

Caution labels should be mounted on a visible location for the application and at the central.

For piping marks should be made each 3 meter.

Material: Plastic
Length: 145 mm
Width: 103 mm
Part.no 89 992 46 Ground
89 992 47 Pipes
89 992 48 Roof

Caution tape for pipes

Length: 32 mm
Width: 75 mm
Part.no: 89 992 49

ELCB

DRNL-7-63 ELCB

Area of use

The DRNL-7-63 complies with IEC 61008. It can cut off the faulty circuit immediately on the occasion of shock hazard or earth leakage. It is applied in varieties of plants, enterprises, buildings, constructions, commercial hotels or homes, in circuits up to single phase 230V, tree-phase 400V 50 or 60 Hz.

Technical data

Standard: IEC61008
Tripping time (instaneous): Typ G 10ms delay;
Typ S 40ms delay with selection
Rated Voltage: (UC): 230V/400V;50/60Hz
Rated current: (In) 25A
Rated tripping current: 30,100,300,500mA
Rated non-tripping current: 0.5In
Sensitivity: Type A and type AC
Rated short circuit strength (Inc): 6000A
Back-up fuse short circuit: In=25-63,63A gL In=80A 80A gL
Rated faulty breaking capacity Im In=500A
Electrical life: > 4000 times
Mechanical life: > 20000 times
elcb_dl

elcb_dl_diagram

elcb_dl_koppling