Accessories floor heating

Hose clamp

AREA OF USE

Fix the heating cable at installation in floors, on roofs, in box gutters, cisterns etc.

fastband

The hose clamps are available with different c/c-distances, special ordering, for easy mounting.

The distance between two “attaching lips” is 110 mm. Other distances can be obtained on request.

Material: See below:
Length:
  • galvanized 25 m/reel
  • plastic 1 m
  • other in running metre
Width:
  • metal 20 mm
  • plastic 10 mm
Part.no
  • 89 992 34 Hose clamp plastic (c/c 30mm). Delivered in lengths of 1m.
  • 89 992 35 Hose clamp galvanized (c/c 55mm). Delivered in packages about 25m.
    Can be obtained with adapted c/c by order
  • 89 992 35SS Hose clamp stainless. Delivered in running metre
  • 89 992 34AL Hose clamp aluminium. Delivered in running metre
  • 89 992 34CU Hose clamp copper (c/c 30mm).
    Delivered in running metre.

Plate metal

montageblackAREA OF USE:

For installation of heating cables in wooden joists.

Is installed in derailed at passages in arises to eliminate direct contact against combustible material.

Material: Aluminium
Dimension: 65 x 30 x 20 cm
Part.no 89 992 42

Pressing tool

Pressing tool for Vinnyflex Heating foil

Part.no: 8987430

presstang

Connection/End termination kit Vinnyflex

Part.no: 8320

  1. CONNECTIONS CLIP 8354 Clip for connection of the power lead to the foil. Largest wire cross section that can be connected in the clips: 2 x 2.5mm².

     

  2. INSULATOR 8352. Mastic-tape. For insulation of connection clip and end termination. 4 st 50x50mm vulcanized tape “Mastik” for a water-tight cable connection.

     

  3. END TERMINATION. 2 pcs 50x50mm vulcanized tape “Mastik” for a water-tight end termination.
anavsatsfolie